Curved rammed-earth toned Saudi façade lit at dusk
All products
Made in Saudi Arabia

Saudi MCM

Locally made. Architecturally flexible.

Locally manufactured Modified Clay Material combining the character of stone, clay, brick, wood and rammed earth with a lightweight, flexible format for interior and exterior surfaces. Designed to support shorter supply chains, project adaptability and Saudi manufacturing capability — reflecting the ambitions of Vision 2030.

Saudi-made · Lightweight · Flexible · Interior + exterior
Finish library · selected

A sample of the tones we work in.

Ivory Travertine
Desert Dune
Cream Limestone
Silk Chalk
Golden Sand
Golden Oak
Coffee Walnut
Ochre Timber
Coffee Brown
Saudi Stone
Cool Taupe
Graphite Shadow
Installation

Installed in six clear steps.

A straightforward adhesive-mounted system — no wet trades, no specialist masonry crew.

01

Substrate preparation

Ensure the wall is clean, dry, sound and level. Repair cracks and prime porous substrates for optimal adhesion.

02

Layout & cutting

Dry-lay sheets to plan the joint pattern, then cut MCM cleanly with a utility knife or electric shears.

03

Adhesive application

Apply polymer-modified tile adhesive with a notched trowel, back-buttering each sheet for full coverage.

04

Placement & pressing

Press each sheet firmly from the centre outward and align joints with spacers for a consistent reveal.

05

Jointing & grouting

Fill joints with colour-matched flexible grout or sealant and wipe the surface clean.

06

Sealing & handover

Apply protective sealer where specified, inspect the finished surface and hand over.

In place

This range, applied.

Interiors, façades and curved surfaces finished with the same material family.

Rammed-earth courtyard walls framing the sky under a timber soffit
Exterior

Built for Saudi sun, dust and humidity.

Not sure which fits?

Request a sample — we'll send it to you.

Request a sample